Jump to content

Red Alert 2 Modification


Ska-Ara
 Share

Recommended Posts

xjc2dxif.png

My actuall Progress

Buildings:

Allied Powerplant - Without Interior

jskvr8m5.jpg

Soviet Tesla Reactor - Without Interior

nv3phvaa.png

Allied Ore Ref - Without Interior

ipowuqdk.jpg

Soviet Ore Ref - Without Interior

4ewtlzmw.jpg

Allied Barracks - Without Interior

sd3ogbl5.jpg

Allied Warfactory - Without Interior

wrvijiu9.jpg

Soviet Warfactory - Without Interior

ititrvqt.jpg

Allied Airfield - Without Interior

zc3atljc.jpg

Allied Pillbox - Placeholder M240

4wusk77c.jpg

Allied Patriot

bwtqph4i.jpg

Allied Prismtower

bgkde25f.jpg

Soviet Tesla Coil

cfuyv2x3.png

Vehicles:

Grizzly Tank

7ijelnj6.jpg

IFV - Repair, Missiles, Psychotic, Gunner

y8iuzbdp.jpg

Mirage Tank

aczfe4ms.png

Prism Tank

tbetgzfn.png

Alpha Footage:

6KKLkgr.jpg

Q4lmK6Z.jpg

VU09Odp.jpg

wLPN8Fz.jpg

Im happy about EVERY Comment here :)

Credits:

All Allied Buildings, All Soviet Buildings except the Tesla Coil from Kevin Mier - Ska-Ara

Soviet Tesla Coil by hm Shark, Metamind09

Texture of the Grizzlytank by Renegade X / Havoc89

Sandbags by 3D-Regenerator

Some Graphics and SoundsWestwood Studios/EA

M240 Machinegun (Pillbox) by Nutpaul

Edited by Guest
Link to comment
Share on other sites

  • Replies 274
  • Created
  • Last Reply

Top Posters In This Topic

  • Developer

"Alarmstufe Rot 2"

^ That is hilarious, reminds me of being in Germany a long time ago and reading "Stirb an einem anderen tag" or similar which filled the entire "Die another day" film poster... barely any space left for the actors :P

On the surface the models look good, clean and well rendered versions of the RA 2 buildings, well done!

Link to comment
Share on other sites

"Alarmstufe Rot 2"

^ That is hilarious, reminds me of being in Germany a long time ago and reading "Stirb an einem anderen tag" or similar which filled the entire "Die another day" film poster... barely any space left for the actors :P

On the surface the models look good, clean and well rendered versions of the RA 2 buildings, well done!

Yea haha xD its often such hilarius translation

But i have to say.. "Alarmstufe Rot 2" sounds for the most Germans more dangerous then Red Alert 2.

What you mean with Die another Day i know very well xD

look here.. Die Hard .. in germany Stirb Langsam

Die Hard with a Vengeance : Stirb langsam jetzt erst Recht!

A Good Day to Die Hard - Stirb langsam – Ein guter Tag zum Sterben

eieieie :D but i think German is a good hard language for the RA universe.. shame that we are there just some sidekicks xD

To the Models: THx alot for this Comment :) its the first time i start a "mod" in another Country :D

I do my best to make the Models look such accurate i can. i look at the pictures of the buildings in photoshop to make a big zoom and brighter them up to see some hidden details :D

to hear that the models look good so far is a big boost for me :) thx alot for this! :o

in this case i have a question for you :D i know that rx just uses Air,Vehicle,Soldier fields, raffenery and some others.. my question is know.. is it possible to make some more buildings with varius functions?

f.e repair field for repiaring, or battle lab for enabling some extra units?

and is there a possibility to "build" new structures after X mins or let them building by "spending" some credits ?

Link to comment
Share on other sites

Looks awesome, but I have to admit that the smoothness of the model worries me. How much verts used to make a single building there?

Just asking since you never said anything about this being Hi-Poly or Low-Poly

Its hard to say if im hi or low poly.. i try to make them accurate like RA2 not really "realistic"

but in this case.. every building has about 5.000 -15.000 polygons.

Link to comment
Share on other sites

i can just say that i do my best to make good stuff in i good time. Im Sure at the end some ppl say "hmm thats not soo good.. and this could be better" but thats normal.

We will see later if the Stuff is good what i made or not :)

But at this moment i think its not bad what i make so lets move forward :D

Btw: Finished Ore Raffinery

vxhw8ru3.jpg

Link to comment
Share on other sites

Looks good and detailed. Still wondering about PP's door though

i think i set the pp interior in one of this "walls" not be really sure now

today i made this Allied Warfactory.. its finish.. but i dont know why.. im not really happy with this.. maybe i rework this later.. probably i know then what i dont like on it :D

wrvijiu9.jpg

Link to comment
Share on other sites

  • Developer

I know we don't have much problems with RA2 because it's mostly 2D...

But maybe you need to consider raising up the ceiling. Prism Tanks are quite a tall thing

Also, that roof is supposed to be able to open when the Nighthawk transport comes out. Make it a different object altogether. Same goes with Barracks' door actually

Link to comment
Share on other sites

yea your right^^

but i thought that the "aircrafts" could be make in the Airforce Command Headquarters, so its seperated from the War Factory.

because the height .. i think you said an import thing.. the Prism tank is realy much high.. now its the question.. raise up the Building.. or let the tank start with an " lower tower" which raises up after he left the Building..(think thats the more realistic way)

but that i just can see if i made the tanks and resize all the building

Link to comment
Share on other sites

  • Developer

Or you can just use the in-game tanks as reference. Won't be too far off. Besides, if the polys are just about 5000, the game engine would handle it fine

Also, you might want to avoid doing that. By lore, Soviet does not have 'Helipad' buildings unlike GDI and Nod in Tiberian Sun and TS:Reborn

Link to comment
Share on other sites

Or you can just use the in-game tanks as reference. Won't be too far off. Besides, if the polys are just about 5000, the game engine would handle it fine

Also, you might want to avoid doing that. By lore, Soviet does not have 'Helipad' buildings unlike GDI and Nod in Tiberian Sun and TS:Reborn

true true.. hmm...mhh..mhm..hmh xD lets see when where at the end.. of the "creation line" then i can rework some ideas and so on..

at this moment i just need the aircraftfield for the allieds.. then i start to make the Pillbox/Patriot/Prismtower i think its enough for the allied building line :D

after that.. i have to look hehe ^^ i got much time so i dont need so push ^^

but if anyone wants to help i would be happy.. i could need someone who is handy with udk or handy with making textures :)

Link to comment
Share on other sites

Allied Pillbox - Placeholder M240

4wusk77c.jpg

Mind sending me this as an FBX or OBJ? I need to practice my Normal Mapping skills and this seems like a good start. Don't worry about the MG btw

yea no problem..

put dont lough about my modelling skills :PxD

btw: on the first Post i add a Credit Section. There u can see that these sandbags are not from me. Probably i later make some own.. but i like these here very much. In this case they already have some maps.. but you can play with them how u want :)

Allied_Pillbox.7z

Link to comment
Share on other sites

Handes you sound very annoyd ^^

be cooler dude :D

Here the Absolute Polys

Allied Powerplant 6.500 Polygons

Allied Barracks 24.000 Polygons (without these Sandbags 3.000 Polygons)

Allied Ore Raffinery 10.000 Polygons

Allied War Factory 11.200 Polygons

Allied Airfield 5.700 Polygons

Allied Pillbox 28.000 (without the Placeholder Gun and Sandbags 1.000 Polygons)

Allied Patriot 2.7000 Polygons

To say is that the sandbags are very poly counting.. i think i will make later a newer version .. not such detailied but not just only 150 Polygons ^^

how everyone see.. all there numbers are just the actuell state.. there is no special details or interior in this polycounts..

People who says thats to less ect.. My only answer to this.. im a Hobby Artist not such a pro who make this as a job :P:D

Link to comment
Share on other sites

Handes you sound very annoyd ^^

be cooler dude :D

That's the portrait of my Levinski (my profile pic) giving you that feeling. I ain't feeling annoyed at all :P

then it was a problem with the translation into my german hehe ;)

heres the last building.. the Prism Tower .. i tried to make a hybrid of the Game Tower and this the one shown in the Blueprint :)

bgkde25f.jpg

Link to comment
Share on other sites

Here some try of me of making own Textures for these Stuff xD

I dont know if is good.. or just bad.. pls give some feedback :D

Its 2 times the same stuff.. the first picture has a bad try to make a lightning that shows some bump and specular details.. th second one is the standart render i used the pictures before

Just click the photos to enlarge

j359xfnc.jpg

pof83weu.jpg

Link to comment
Share on other sites

hey dudes new question.. i found a way to export the "unit" voxels of ra 2.. so i can make quite better models of the vehicles :)

now i tried to do the same with the buildings. there are shp files.. my question is now.. is that just a kind of animation? somehin like a diashow or a gif.. or is this a 3d modell ?

last could help me to make better models :)

Link to comment
Share on other sites

my progress on the allied vehicles take progress.. but very slow.. cuz i have no need for beeing fast xD

this ist the actual Progress.. the werid looking model is the original model/voxel exported out of ra2

and yea my model has some mor width ..think it looks a bit better?

xhqkw2xn.jpg

xqt99usf.jpg

b5l6nzpv.jpg

oh hmmm... I'm not sure that's how the chronosphere looks though. A shape of curved windows would be much closer IMO

can u show me a example how u think it should be?

Dude you're doing amazing work! I'm really really looking forward to start doing the béta testing for this. You also might want to model a drill which drills out gold from the ground since we have no tiberium field in RA2..

i think this drill is a really easy work but has not much priority now :D

for me its important to make all the models which are usable for the gaming. after that i start making this kind of ambient :D

But i definitly need help at the texturing.. its really not my fav work.. and im pretty bad at this :o

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...