Kibax Posted August 17, 2019 Share Posted August 17, 2019 (edited) Just installed the latest Windows 10 updates. Now when I try and boot up the game, I get a grey screen and it closes. I've restarted, run in Win 7 Compatibility Mode and re-installed the game. Event Viewer shows: Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Renegade X because of this error. Program: Renegade X File: The error value is listed in the Additional Data section. User Action 1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again. 2. If the file still cannot be accessed and - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted. - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer. 3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER. 4. If the problem persists, restore the file from a backup copy. 5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance. Additional Data Error value: 00000000 Disk type: 0 Wat do? Edited August 17, 2019 by Kibax Quote Link to comment Share on other sites More sharing options...
Kibax Posted August 17, 2019 Author Share Posted August 17, 2019 After rolling back the update, RenX now works. Weird. If anyone else has this issue it's KB4512508. Quote Link to comment Share on other sites More sharing options...
Kibax Posted August 17, 2019 Author Share Posted August 17, 2019 Clearly I spoke too soon. Once I changed the resolution and a few graphics settings it crashed and the error re-surfaced. Deleted all UDK files in /config and then re-applied settings one by one. No crash.. So I don't really know what the issue is. Anyway, fixed... for now. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.